Filter
Top Products
www.packardbell.com
91
5 Release the microphone cable from the adhesive tabs securing them, and
then remove the microphone from the LCD assembly lid.
6 Place the new microphone on the LCD assembly lid and secure its cable
on the adhesive tabs.
7 Reinstall the LCD panel by performing steps 11 – 14 of the “Replacing the
LCD panel” procedure on page 84.
8 Reinstall the LCD front panel by performing steps 6 – 9 of the “Replacing
the LCD front panel” procedure on page 79.
Make sure the webcam lens is aligned with camera peephole on the LCD
front panel before you secure the panel in place.
9 Reinstall the LCD panel assembly by following the steps 13 – 15 of the
“Replacing the LCD panel assembly” procedure on page 76.
10 Reinstall the system board by performing steps 19 and 20 of the “Replacing
the system board” procedure on page 67.
11 Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53.
12 Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48.
13 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
14 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.
15 If you have disconnected any wireless antennas, reconnect them now.
16 Reinstall the bay cover.
17 Reinstall the battery.