www.packardbell.com
59
7 Detach the mylar tape covering the speaker cable, and then release the
speaker cable from the latches securing the cable.
8 Disconnect the speaker cable from the power button board.
9 Remove the speaker screws, and then remove the speakers.
10 Position the new speakers on the keyboard frame.
11 Secure the speakers with the screws removed in step 9.
12 Reconnect the speaker cable to the power button board.
13 Secure the speaker cable on the keyboard frame latches.
14 Cover the speaker cable with mylar tape.
15 Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53.
16 Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48.
17 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
18 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.