Packard Bell NS1 1HR Laptop User Manual


 
www.packardbell.com
57
18 If your new keyboard already includes the keyboard frame, go to step 21.
If you need to use the keyboard frame from the old keyboard, go to step 19.
19 Position the new keyboard on the keyboard frame.
20 Secure the keyboard with the screws removed in step 16.
21 Lay the keyboard down and insert the keyboard cable to its system board
connector, and then close the clip to lock the cable in place.
22 Flip the keyboard over and press it down on all sides until it snaps into place.
23 Close the LCD panel and turn the notebook over so the base is facing up.
24 Secure the keyboard frame with the screws removed in step 8.
25 Reinstall the palm rest module by performing steps 14 17 of the “Replacing
the palm rest module” procedure on page 48.
26 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
27 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.
28 If you have disconnected any wireless antennas, reconnect them now.
29 Reinstall the bay cover.
30 Reinstall the battery.
Important
The keyboard cable is correctly oriented if it is not twisted.