Filter
Top Products
9. Programmable Features
78
9.6 Cordless handset programming using the base unit
PIN
For your reference, a chart of all items which can be customised for the unit using the base unit PIN is
printed below. Details of each item can be found on the corresponding pages.
L Keep the front cover page open for button locations.
L When customising the unit, the current setting is indicated by ).
Note:
L Up to 5 menu items can be displayed at a time. To select a menu item not shown on the current page,
scroll up or down by pushing the joystick up or down, respectively.
Base unit settings
menu
Sub-menu Sub-menu 2 Default setting Page
“Call Option”“Dial Mode”“Tone” page 79
“Recall” “Type 2” page 79
“Pause Time” “Short” page 79
“Emergency Call”“000”, “111”
*1
and “911”,
“999”
page 79
“Set ARS”“Set Area Code” ----------- page 80
“Call Restricted” ----------- page 79
“Cancel Handset”----------- ----------- page 81
“Other Option”“Change Base PIN”“0000” page 80
“Reset Base” ----------- page 80
*1 If you set the location setting to “New Zealand” (feature #74 on page 69), the default setting will
be “111”, “911” and “999”.
FC243AL-PFQX2096ZA-en.book Page 78 Thursday, September 30, 2004 3:37 PM