Filter
Top Products
117
Error Message
Problem Solving
Internet Fax Return Receipt Error Messages
Error messages that are printed on the Internet Fax Return Receipt when remote programming of the Auto
Dialer via Email fails.
Error Message Possible Cause / Action
1 Format Error : <@command block, the
"@end" command is missing.>
The block termination command "@end" is missing in the
"@command" block, add the "@end" command and try again.
2 Format Error: <@begin block, the
"@begin" command is missing.>
The block start command "@begin" is missing in the "@begin" block,
add the "@begin" command and try again.
3 Format Error : <@begin block, the "@end"
command is missing.>
The block termination command "@end" is missing in the "@begin"
block, add the "@end" command and try again.
4 Format Error : <@system block, the
"@end" command is missing.>
The block termination command "@end" is missing in the "@system"
block, add the "@end" command and try again.
5 Format Error : <@sender block, the
"@end" command is missing.>
The block termination command "@end" is missing in the "@sender"
block, add the "@end" command and try again.
6 Format Error:<@domain block, the "@end"
command is missing.>
The block termination command "@end" is missing in the "@domain"
block, add the "@end" command and try again.
7 Format Error : <@program block, the
"@end" command is missing.>
The block termination command "@end" is missing in the
"@program" block, add the "@end" command and try again.
8 Format Error:<@system block, the
"@system" command is missing.>
The system block start command "@system" is missing in the
"@system" block, add the "@system" command and try again.
9 Permission denied : <054 Fax Forward
parameter is set to "Valid".>
Set the Fax Forward parameter to "Invalid". (See page 85)
10 Permission denied : <Fax machine is busy
performing a task.>
Try again later when the machine is not busy.
11 Error : <Programmed ABBR overwrite
prohibited. Use open ABBR only.>
Cannot overwrite existing programmed data, use the "Delete"
command to erase the existing data first.
12 Permission denied : <Password is
incorrect.>
Correct the password and try again.
13 Permission denied : <158 PC Remote
Dialer Update parameter is set to
"Invalid".>
Set the PC Remote Update parameter to "Valid". (See page 87)
14 Format Error : <error line> The format of the Entry is incorrect / incomplete or the data string for
each station is not defined within a single line.
15 Warning : <error line> The format of the Entry is incorrect or the number of characters
entered, exceed the maximum allowed in the field. Correct it and try
again.
16 Warning : Field limit exceeded<error line> The maximum number of Station Name, Domain Name, Sender
Name, Program Name, etc. were exceeded.