Filter
Top Products
84
Setting Your Machine
Fax Parameters
No. Parameter Setting
Number
Setting Comments
001 CONTRAST
(HOME)
1 Lightest Setting the home position for the CONTRAST.
2Lighter
*3 Normal
4Darker
5Darkest
002 RESOLUTION
(HOME)
1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3S-Fine
4600 dpi
5 Halftone
(Fine)
6 Halftone
(S-Fine)
7 Halftone
(600 dpi)
004 STAMP
(HOME)
*1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2On
005 MEMORY
(HOME)
1 Off Setting the home position for the MEMORY.
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2Outside
3No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date
& time, remote ID, percentage of reduction and page
number on the bottom of each received document.
2Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3Loud
012 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/Inc. only.
Off : Does not print
Always : Always prints
Inc. Only : Prints only when communication has failed.
2Always
*3 Inc. Only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal
automatically after every 200 transactions.
*2 Valid
014 FILE ACCEPTANCE
REPORT
*1 Invalid Selecting whether the machine prints the file
acceptance journal.
If you set this parameter to valid, a journal will print out
after any memory communication.
2Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
*2 Auto
022 SUBSTITUTE RECEIVE 1 Invalid Selecting whether the machine receives to memory
when the recording paper runs out, toner runs out or the
recording paper is jammed.
*2 Valid
023 REC. PAPER SIZE (----) Selecting the Paper Tray and paper size.
Fax Parameter Table