Filter
Top Products
88
Setting Your Machine
Fax Parameters
161 DNS SERVER 1 Invalid Selecting whether to enable the DNS Server.
*2 Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the
email message body.
*2 English
3English+
Japanese
163 ROUTING HEADER *1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed
pages.
2Valid
164 IFAX XMT HEADER
(Email only)
*1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents back
to your PC)
Note: When sending to a Domain other than as
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
2 Not included
168 CC/BCC STATION *1 Invalid Selecting whether to allow the CC/BCC email
address(es) to be entered.
2Valid
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such
as IP Address, Subnet Mask, Default Gateway IP
Address,etc.)
Note: If you change the setting of this parameter, turn
the Power OFF/ON.
*2 Valid
170 SMTP
AUTHENTICATION
(See page 89, Note 3)
*1 Invalid If you transmit to the SMTP Server, user name and
password are used for authentication. Selecting "Valid"
allows you to set up the user name and password.
2Valid
171 POP BEFORE SMTP
(See page 89, Note 3)
*1 Invalid If you transmit to the SMTP Server, POP user name and
POP password are used for authentication.
2Valid
172 DIRECT IFAX XMT *1 Invalid Selecting whether to be prompted during Auto Dialer
registration if the station you are programming is to
receive Internet Fax directly without going through a
Mail Server.
2Valid
173 DELIVERY NOTICE
(HOME)
*1 Off Setting the home position of whether to request a
Message Disposition Notification (MDN) for a delivery
processing confirmation indicating that the message
(email) was read, when sending an email/Internet Fax.
This setting will be the default value for the Function
Select Mode (F8-2).
2On
174 APOP
AUTHENTICATION
(See page 89, Note 3)
*1 Invalid This parameter allows you to encrypt the protocol for the
POP password security when connecting with the POP
Server.
2Valid
177 XMT FILE TYPE 1 TIFF Selecting whether the document(s) are converted to
TIFF-F or PDF format when Scanning-to-Email, or TIFF-
F format when sending to an Internet Fax.
The default is "PDF" as PDF has become the industry
standard for exchanging documents from computer to
computer (Scan-to-Email). However, PDF format cannot
be used for Internet Faxing (Internet Fax to Internet Fax)
as current Internet Fax specifications do not support
these file formats, and TIFF-F format must be used
when sending to an Internet Fax machine.
(This setting can be temporarily changed when sending
an Internet Fax with the Select Mode (F8-6)
"XMT FILE TYPE/NAME")
*2 PDF
No. Parameter Setting
Number
Setting Comments