Filter
Top Products
9
Getting To Know Your
Machine
NOTE
1. If your machine sounds an alarm (pi-pi-pi) in Step 3 above, this indicates that the Auto Dialer
is Full (More than 50 full email addresses are entered or 50 transmission reservations
including G3 communication jobs have been already reserved).
2. To utilize the Email functions, your machine needs to be set up properly on your network.
Please contact your network administrator for actual network setup.
3. Auto dialer (Address Book or One-Touch/ABBR.) is only available when stations are
registered. (See page
72)
4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may
deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.
5. You can search for another name starting with the same character by scrolling with the Cursor
Keys
(
/
).
Select the desired
Transmission setting.
(See the column on
the right)
The document(s) is stored into
memory with a file number. Then
starts sending the document(s).
Transmission settings.
2
3a
3b
3c
4
Verification Stamp
ON : The light is lit.
OFF : The light is off.
Lighter Normal Darker
STANDARD for standard originals
FINE for detailed originals
S-FINE for finer detailed originals
600 dpi for 600 dpi detailed originals
HALFTONE (FINE)
for photo originals with Fine
Resolution
HALFTONE (S-FINE)
for photo originals with S-Fine
Resolution
HALFTONE (600 dpi)
for photo originals with 600 dpi
Resolution
CONTRAST
- [ ] +
(See Note 4)
Quick Name Search Email Addressing
or
One-Touch/ABBR. Email Addressing)
Manual Email Addressing
3d
Directory Search Email Addressing
and/or
and/or
A
B
C
ADF Tray
Original Guides
A
B
Upper Limit Indicator
(A)
Upper Limit Guide (B)
You can send the same document(s) to
multiple stations. Multiple stations can be
selected by any combination of the Steps
3a (3b), 3c and/or 3d, and then pressing
.
START
(
Adjusting the Contrast of
scanned image data by
pressing cursor keys ( / ).