Filter
Top Products
29
Internet Fax/Email
Features
* Contact your Network Administrator for this information.
END_P29
Parameter Comments
22* LDAP Server IP IP Address of the LDAP Server. (Available when DNS setting is "OFF" on the Fax
Parameter No. 161)(Available for some countries only.)
23* LDAP Login Name Login Name assigned to your machine. (Up to 40 characters, Ex: username)
(Available for some countries only.)
24* LDAP Password Password assigned to your machine. (Up to 10 characters, Ex: password)
(Available for some countries only.)
25* LDAP Search Base ID for starting the search in the directory on the LDAP Server. (Up to 60 characters,
Ex: cn=users, dc=company, dc=com)
(Available for some countries only.)
26 HOST NAME The Name of the DNS Server.
27 Default Subject The default information to be added to the Subject Line for all outgoing Email (up to
40 characters).
28 Default Domain When the outgoing email address is incomplete by SMTP standards, the Frequently
Sent Domain specified here will be automatically added to the email address. This
feature is also useful as a shortcut when manually entering email addresses to a
frequently used Domain. (Up to 50 characters)
29-38 Selectable Domains
(01) ~ (10)
Enter up to 10 Domain Names that can be selected using the "\/ or /\" key during
Manual email addressing. (Up to 30 characters)
39 Remote Password This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to 10
characters)
40 Relay XMT Password A password that provides Network security for your Relay Station (used exclusively
for G3 relay purposes). (Up to 10 characters)
41 Manager’s Email
Address
Department Manager’s Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
42-51 Relay Domain
(01) ~ (10)
Enter up to 10 Domain Names that have been authorized to access your machine for
Relayed Transmission Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in your machine.
52
Community Name (1)
Selects whether to change the Community Name(1) SNMP.
Enables read only.
53
Community Name (2)
Selects whether to change the Community Name(2) SNMP.
Enables read/write.
54 Device Name Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
55
Device Location
Inputs the device name when required.
(For Status Monitor)