Filter
Top Products
2000-A2-GB20-10 - 126 - February 2004
Available Interfaces:
1. G2237 xDSL
2. 10/100BaseT Ethernet
0. (Abort)
Type the number of the port to update.
3. If more than one interface is configured on the selected port, the IAD
displays a list of interfaces:
Port DLCI Encapsulation
1 18 Proprietary Voice DLCI
Type the number of the port.
4. The IAD displays the current setting and the prompt:
Enter Path Cost for Slot 1, Port 1 (1..65535):
(32768)400
Type the path cost value and press Enter.
5. The IAD updates the configuration.
6. Press any key to return to the Bridge Configuration menu and continue
with other configuration tasks.
7. Reset the IAD (page 14) when you finish bridge configuration.
Deleting a
Bridge For-
warding
Database
Entry
To delete an Ethernet address from the bridge forwarding database, follow
these steps:
1. Type D on the Bridge Configuration menu to select Delete Bridge
Forwarding Database Entry.
2. The IAD displays the following instructions.
Enter Ethernet address to delete from bridge
database **-**-**-**-**-**
3. Type the MAC address of the Ethernet port and press Enter.
4. The IAD deletes the database entry and updates the configuration.
5. Press any key to return to the Bridge Configuration menu and continue
with other configuration tasks.
6. Reset the IAD (page 14) when you finish bridge configuration.