Paradyne JetFusion Integrated Access Device Network Card User Manual


 
2000-A2-GB20-10 - 5 - February 2004
Gateway manufacturers. These IADs prioritize voice packets and
dynamically allocate bandwidth between voice and data services.
Features
Interoperable with DSLAMs based on Alcatel, Texas Instruments,
MetaLink, and Globespan chip sets. These include Lucent Stinger/
TNT, Nokia Speedlink System, Promatory IMAS, AccessLan
PacketLoop, Accelerated Networks AN-3200, Coppermountain
CopperEdge, and Paradyne GranDSLAM DSLAMs, for example.
Seamless voice and high-speed data integration over xDSL or T1/ITE1
Supports data rates from 144 Kbps to 2.3 Mbps and customer premise
interfaces including POTS, 10/100BaseT Ethernet
Compatible with WAN protocols including ATM and Frame Relay
RJ21X POTS interface with Loop Start or Ground Start
Universal Serial Interface supports V.35 and EIA-530
Dynamic and static IP routing and bridging capabilities
Firewall support via IP filtering
DHCP and NAT to support IP address management
Management capabilities including Telnet, SNMP and TFTP
16/24-port IADs are characterized by different WAN interfaces and
different voice capacity:
JF2216 IAD—provides WAN access over T1/E1, and telephone
support for 16 voice ports via RJ21X connector.
JF2216c IAD—provides WAN access over channelized T1, and
telephone support for 16 voice ports via RJ21X connector.
JF2316 IAD—provides WAN access over SDSL, and telephone
support for 16 voice ports via RJ21X connector.
Physical and electrical specifications for each IAD are listed in Appendix
C, JetFusion IAD Specifications on page 254.
Front Panel Power and Status Indicators
The front panel of the IAD contains several LEDs. These LEDs provide
general information about the operational status of the IAD.
Figure 1–4. 16/24-Port IAD Front Panel
POWER LAN
LINK
LAN
ACT
WAN
LINK
VOICE
Status Indicators
Front Panel
DCE
LINK
DCE
ACT
03-17483