Filter
Top Products
2000-A2-GB20-10 - 184 - February 2004
Network
Statistics
Reports
The Network Statistics menu contains commands to display statistical
information about the packets handled by the IP routing engine, and to
clear network statistics for specific protocols.
Type N on the Reports menu to display the Network Statistics menu:
HDB3 coding enabled | disabled
Payload Scrambling enabled | disabled
Port #
Sa4 Bit set | cleared
Sa5 Bit set | cleared
Sa6 Bit set | cleared
Sa7 Bit set | cleared
Sa8 Bit set | cleared
Rcv Clk Source Internal | External
PPP Auth Type (WAN port) None | PAP Client | PAP Server | CHAP Client |
CHAP Server
Userid PAP User ID
Password PPP password
Peer Name PPP peer name
DLCI—Frame Relay Only RAW (No Encapsulation) | Proprietary Voice
DLCI | RFC 1490 | ATM RFC 1483 (Tunneling)
VPI/VCI—ATM Only AAL5 (None) | AAL0 (None) | Proprietary Voice
| RFC 1483 (using VC Muxing) | RFC 1483
(with LLC Encapsulation) | RFC 2364
(PPPoATM with LLC Encapsulation) | RFC
2364 (PPPoATM using VC Muxing) | AAL1/
CES | AAL2/LES
MTU maximum transmission unit per port
IP Interfaces on Port #
ID host ID
IPAddr IP Addresses for the ID (maximum = 8)
IPMask no. of bits reserved for host ID (max. 8)
Priority NORMAL | HIGH
Ethernet address Ethernet address (Ethernet)
Full duplex Enabled | Disabled (Ethernet)
Table 12–1. Current Configuration Report
Parameter Description