Filter
Top Products
2000-A2-GB20-10 - 52 - February 2004
Using the
WAN Con-
figuration
Menu
Configuring the IAD for data involves several tasks. Tasks in this chapter
are described beginning at the WAN Configuration menu (which varies,
based on the WAN interface and datalink protocol).
Figure 4–3. WAN Configuration Menu
6300
LAN LINK LAN ACT WAN LINK VOICEPOWER
JF2304
JF2308
JF2316
SDSL with Frame Relay
1. Set the datalink protocol to Frame Relay (page 53)
2. Configure SDSL (page 64)
3. Configure DLCIs (page 86)
4. Configure Frame Relay options (page 90)
5. Configure the voice path (page 127)
SDSL with ATM
1. Set the datalink protocol to ATM (page 53)
2. Configure SDSL (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
LAN LINK LAN ACT WAN LINK VOICEPOWER
JF2304
To configure the physical interface of the IADs, you may also
use the Quick Configuration command. For more information,
see Quick Configuration on page 95.
LAN LINK LAN ACT WAN LINK VOICEPOWER
JF2104
JF2104i
JF2108
G.SHDSL with ATM
1. Set the datalink protocol to ATM (page 53)
2. Configure G.SHDSL (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
SDSL with ATM
1. Set the datalink protocol to ATM (page 54)
2. Configure SDSL (page 64)
3. Configure PVCs (page 75)
4. Configure ATM (page 84)
5. Configure the voice path (page 127)
**************************************
WAN Configuration Menu
**************************************
Configuring T1/E1
1. Configure Datalink Protocol
2. Configure Physical Interface
3. Configure DLCIs
4. Configure FR Options
The IAD displays
the physical
interface in this
status message.
These options change,
based on your choice
of datalink protocol