Filter
Top Products
2000-A2-GB20-10 - 205 - February 2004
Media Sta-
tistics
Reports
Type M on the Reports menu to display Media statistics reports.
Media statistics reports display statistical information about the total
packets handled (Layer 2) on a per port basis.
Reports on physical connections vary, based on the type of connection.
Reports include Ethernet, USI, G.SHDSL, ASDL, SDSL, ATM and Frame
Relay.
To display specific media statistics, select an interface to display the
statistics as shown in these steps:
1. The IAD displays the interfaces on this IAD, and a prompt:
Available Interfaces:
1. T1/E1
2. 10/100BaseT Ethernet
0. (Abort)
Type the number of the interface.
2. With the interface chosen, the IAD displays the Media Statistics menu.
Figure 12–6. Media Statistics Menu (Sample)
To display a specific report, enter the option. For detailed information
about each report in the Media Statistics menu, or to clear network
statistics, proceed to the appropriate section:
Frame Relay Statistics Report (Table 12–2, following)
Universal Serial Interface Statistics Report (Table 12–3 on page 187)
ATM Statistics Report (Table 12–4 on page 188)
G2237 xDSL Statistics Report (Table 12–21 on page 210)
Ethernet Statistics Report (Table 12–22 on page 212)
G7070 ADSL Statistics Report (Table 12–23 on page 214)
POTS Statistics Report (Table 12–24 on page 215)
BRI Statistics Report (Table 12–25 on page 216)
Clearing a Statistic (Clearing Network Statistics on page 192)
NOTE
The commands that display on the Network Statistics menu
vary, based on the WAN module and configuration of the IAD.
F. Display Frame Relay Statistics
S. Display Serial Statistics
C. Clear a Statistic