Filter
Top Products
MIB Descriptions
C-12
7610-A2-GB20-10November 1997
ICMP Group
The ICMP (Internet Control Management Protocol) Group objects are fully
supported.
TCP Group
The TCP Group objects are fully supported, with the exception of tcpConnState
object, which will be read-only, since deleteTCB (12) is not supported and is the
only value which can be set.
UDP Group
The UDP Group objects are fully supported.
Transmission Group
Objects in the Transmission Group are supported on the DDS network interface,
User Data port, Management port, and Terminal port. These objects are defined
through other Internet-standard MIB definitions rather than within MIB II.
Table C-7. Transmission Group Objects
Object
Description
rs232
(transmission 33)
Supported on the User Data port, Management port, and
Terminal port. Defined by the RS-232-like MIB (RFC 1659).
enterprise
(transmission 22)
Supported on the DDS network interface by Paradyne
Enterprise MIB.
SNMP Group
The SNMP Group objects that apply to a management agent are fully supported.
The following objects apply only to an NMS and return a zero value if accessed.
H snmpInTooBig (snmp 8)
H snmpInNoSuchNames (snmp 9)
H snmpInBadValues (snmp 10)
H snmpInReadOnlys (snmp 11)
H snmpInGenErrs (snmp 12)
H snmpInGetResponses (snmp 18)
H snmpInTraps (snmp 19)
H snmpOutGetRequests (snmp 25)
H snmpOutGetNexts (snmp 26)
H snmpOutSetRequests (snmp 27)