Filter
Top Products
8-1
7610-A2-GB20-10
November 1997
Messages and Troubleshooting
8
Messages and Troubleshooting
There are many messages available to assess the status of the device and
contribute to problem resolutions. Refer to the following sections:
H
Alarm Messages
—
ASCII Alarms
—
ASCII Alarm Messages
—
Configuring SNMP Traps
—
Dialing Out SNMP Traps
H
Device Messages
H
Troubleshooting
Alarm Messages
Alarm messages and SNMP traps are unsolicited messages sent out from the
DSU automatically when the DSU detects conditions set by the user.
ASCII Alarms
Alarm messages are sent out to an ASCII terminal or printer via the Management
port if:
H Port Use is configured for Alarms. Refer to Management Port Options,
Table A-5.
H Each ASCII Alarm Message to be generated has been enabled. Refer to
Network Interface Options, Table A-2, and System Options, Table A-1.
H ASCII Alarm Messages option is enabled. Refer to Alarms & Traps Options,
Table A-8.