Filter
Top Products
Customizing the SNMP DSU
3-5
7610-A2-GB20-10
November 1997
Establishing Call Setup
From the Control menu, Call Setup is available for the Management port when
connected to an external device, such as a modem or an X.25 PAD. Before
completing the Call Setup screen entries, the phone numbers need to be entered
on the Call Directories screen.
Call Directories Screen
Use the Call Directories screen to enter or change the phone numbers used to:
H Send out an ASCII alarm message to an ASCII terminal or printer.
H Send out an SNMP trap message.
H Connect to an NMS for dial-in management.
To access the Call Directories screen, follow this menu selection sequence:
Main Menu
→
Control
→
Call Directories
main/control/directories
Device Name: Model: 7610
CALL DIRECTORIES
Primary Directory:
Phone Number: xxxxxxx
Clear
Alternate Directory:
Phone Number: xxxxxxx
Clear
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave