Filter
Top Products
Worksheets
B-4
7610-A2-GB20-10November 1997
Alarms & Traps
Configuration Option Settings
Default in [Bold]
ASCII Alarm Messages Enable, [Disable]
Alarm & Trap Dial-Out Enable, [Disable]
SNMP Trap Disconnect [Enable], Disable
Call Retry Enable, [Disable]
Dial-Out Delay Time (min) 1, 2, 3, 4, [5], 6, 7, 8, 9, 10
Alternate Dial-Out Directory Enable, [Disable]
Management
Configuration Option Settings
Default in [Bold]
Communication Protocol
Management Port IP Address [000.000.000.000] – 223.255.255.255
Management Port Subnet Mask [000.000.000.000] – 255.255.255.255
Management Port Link Protocol [PPP], SLIP
Alternate Mgmt Port IP Address [000.000.000.000] – 223.255.255.255
Alternate Mgmt Port Subnet Mask [000.000.000.000] – 255.255.255.255
Default Network Destination [None], Mgmt, IMC
General SNMP Management
SNMP Management [Disable], Enable
Community Name 1 ASCII Text, [Public]
Name 1 Access [Read], Read/Write
Community Name 2 ASCII Text
Name 2 Access [Read], Read/Write
SNMP NMS Security
NMS IP Validation Enable, [Disable]
Number of Managers [1], 2, 3, 4, 5, 6, 7, 8, 9, 10
NMS “n” IP Address [000.000.000.000] – 223.255.255.255
Access Level [Read], Read/Write
SNMP Traps
SNMP Traps Enable, [Disable]
Number of Trap Managers [1], 2, 3, 4, 5, 6
Trap Manager “
n
” IP Address [000.000.000.000] – 223.255.255.255
Trap Manager “
n
” Destination [Default], Mgmt, IMC
General Traps Disable, Warm, AuthFail, [Both]
Enterprise Specific Traps Enable, [Disable]
Link Traps Disable, Up, Down, [Both]
Link Trap Interfaces Network, Port, [Both]