Filter
Top Products
Configuration Option Tables
A-22
7610-A2-GB20-10November 1997
SNMP & Communication Options Menu
The SNMP & Communications Menu includes the following:
H Communication Protocol Options, Table A-9
H General SNMP Management Options, Table A-10
H SNMP NMS Security Options, Table A-11
H SNMP Traps Options, Table A-12
Communication Protocol Options
To access the Communication Protocol Options screen, follow this menu
selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
SNMP & Communication
→
Communication Protocol
Table A-9. Communication Protocol Options (1 of 2)
Management Port IP Address
Possible Settings: 000.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the Internet Protocol address for the Management port.
H Port Use option must be set to Net Link in Table A-5 for the Management Port IP
Address to be effective.
000.000.000.000 – 223.255.255.255 – Sets the Management port IP address. The
range for the first byte is 000 to 223, with the exception of 127. The range for the
remaining three bytes is 000 to 255.
Clear – Clears the IP address and sets to all zeros.
NOTE: This IP address is also used if the Alternate Directory Phone Number is
attempted and the Alternate Mgmt Port IP Address option is all zeros.
Management Port Subnet Mask
Possible Settings: 000.000.000.000 – 255.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the subnet mask needed to access the Management port.
000.000.000.000 – 255.255.255.255 – Set the Management port subnet mask. The
range for each byte is 000 to 255.
Clear – Clears the subnet mask and sets to all zeros. When the subnet mask is all
zeros, the device creates a default subnet mask based on the class of IP address:
– Class A defaults to 255.000.000.000
– Class B defaults to 255.255.000.000
– Class C defaults to 255.255.255.000