Filter
Top Products
Configuration Option Tables
A-26
7610-A2-GB20-10November 1997
Table A-11. SNMP NMS Security Options (2 of 2)
NMS
n
IP Address
Possible Settings: 000.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Enter an IP address for each of the managers set in the previous option. “
n
” is the
number of the manager (1 to 10). Use the next option to establish the security level for
each SNMP manager.
NOTE: When an SNMP message is received from an IP address that does not
match the IP address entries in this option, access is denied and an
“authenticationFailure” trap is generated.
000.000.000.000 – 223.255.255.255 – Sets the NMS IP address. The range for the first
byte is 000 to 223, with the exception of 127. The range for the remaining three bytes is
000 to 255.
Clear – Clears the IP address and sets to all zeros.
Access Level
Possible Settings: Read, Read/Write
Default Setting: Read
Set the access level for each IP address created in the previous option.
Read – Allows a read-only access (SNMP Get) to accessible MIB objects.
Read/Write – Allows both an SNMP Get and Set to MIB objects. Write access allowed
to all MIB objects specified as read-write in the MIB RFC. This access level is overriden
by the Community Name’s access level for the SNMP Manager, if the Community Name
access level is Read.