Filter
Top Products
MIB Descriptions
C-14
7610-A2-GB20-10November 1997
Table C-8. General Port Table Objects (2 of 2)
Object Setting/ContentsDescription
rs232PortOut
Speed
(rs232PortEntry 6)
Contains the port’s output
speed in bits per second.
The rs232PortOutSpeed
object has the same values
as the rs232PortInSpeed
object.
Supports the following speeds for
the:
H User data port: 64,000, 62,400,
60,000, 56,000, 54,400, 52,000,
48,000.
1
H Management port: 2400
2
, 4800,
2
9600, 14,400, 19,200, 28,800,
38,400.
H Terminal port: 2400, 4800,
9600,14,400, 19,200, 28,800,
38,400.
1
The User Data port speed is a read-only value that can only differ from the DDS
network speed if the In-band Management Channel is enabled.
2
This speed is only valid when the port is configured for asynchronous operation.
The following are not supported:
H rs232PortInFlowType
(rs232PortEntry 7)
H rs232PortOutFlowType
(rs232PortEntry 8)
Asynchronous Port Table Objects
The Asynchronous Port Table Objects contains an entry for the Management port
when the port is configured for asynchronous operation and for the Terminal port.
For this unit, entries in the table that are counters (rs232AsyncPortEntry 6–8) are
used to collect statistics only and are not supported.
Table C-9. Asynchronous Port Table Objects (1 of 2)
Object
Description Setting/Contents
rs232AsyncPort
Bits
(rs232Async
PortEntry 2)
Specifies the number of bits
in a character.
Supports only the following values:
7 – 7-bit characters
8 – 8-bit characters
rs232AsyncPort
StopBits
(rs232Async
PortEntry 3)
Specifies the number of
stop bits supported.
Supports only the following values:
one(1) – One stop bit
two(2) – Two stop bits
one-and-half(3) – One and a half stop
bits