Filter
Top Products
Monitoring the DSU
6-8
7610-A2-GB20-10
November 1997
Network Performance Statistics
Performance statistics for the network interface are available to:
H Monitor the current status of the network operations.
H View the DSU’s performance statistics, which:
— Assist you in determining the duration of specific conditions.
— Provide a historical context for problem detection and analysis.
To view the Network Performance Statistics, follow this menu selection sequence:
Main Menu
→
Status
→
Performance Statistics
main/status/performance
Device Name: Model: 7610
NETWORK PERFORMANCE STATISTICS
No Signal Count: 101920 26:33:08
Out of Service Count: 0 0:00:00
Out of Frame Count: 621 8:53:49
Excessive BPV Count: 99830 144:28:11
Invalid BPV Count: 87409
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
ESC for previous menu M
ainMenu Exit
R
efresh ClrStats
All counts show the number of occurrences since the last reset of the counters.
Invalid BPV is a raw count of the number of invalid Bipolar Violations. In the last
column,
hhh:mm:ss
indicates the amount of time the condition has existed in
hours, minutes, and seconds. When the maximum time has been exceeded,
255:59:59+ appears.
The screen appears with the cursor in the function area below the dotted line. To
update the performance statistics, select R
efresh and press Return.
Select C
lrStats and press Return to clear all statistics and refresh the screen.
C
lrStats is not available for an Access level of 3.