Filter
Top Products
Configuration Option Tables
A-24
7610-A2-GB20-10November 1997
General SNMP Management Options
To access the General SNMP Management Options screen, follow this menu
selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
SNMP & Communication
→
General SNMP Management
Table A-10. General SNMP Management Options (1 of 2)
SNMP Management
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies if the DSU can be managed by an SNMP NMS or send out SNMP traps.
Enable – Enables SNMP management.
Disable – DSU does not respond to SNMP messages or send out SNMP traps.
Community Name 1
Possible Settings: ASCII Text, Clear
Default Setting: Public
Community Name of external SNMP Managers allowed access to the DSU’s MIB. This
community name must be supplied by an external SNMP manager attempting to access
a MIB object. Level of access is set in the next option, Name 1 Access.
ASCII Text – Enter a maximum of 255 ASCII printable characters. Refer to the
ASCII
Characters
section.
Clear – Clears the Community Name 1 field.
Name 1 Access
Possible Settings: Read, Read/Write
Default Setting: Read
Set the access level for the Community Name 1 created in the previous option.
Read – Allows a read-only access (i.e. SNMP Get) to accessible MIB objects.
Read/Write – Allows both an SNMP Get and Set to MIB objects. Write access allowed
to all MIB objects specified as read-write in the MIB RFC.
Community Name 2
Possible Settings: ASCII Text, Clear
Default Setting: [blank]
Community Name of external SNMP Managers allowed access to the DSU’s MIB. This
community name must be supplied by an external SNMP manager attempting to access
a MIB object. Level of access is set in the next option, Name 2 Access.
ASCII Text – Enter a maximum of 255 ASCII printable characters. Refer to the
ASCII
Characters
section.
Clear – Clears the Community Name 2 field.