Filter
Top Products
WR1500 4-Port Wireless DSL/Cable Router
®
138
Chapter 17:
Introducing the SMT
This chapter describes how to access the SMT and provides an overview of its menus.
17.1 Connect to your WR1500 Wireless Router Using Telnet
The following procedure details how to telnet into your WR1500 Wireless Router.
Step 1. Make sure your computer IP address and the WR1500 Wireless Router IP
address are on the same subnet. Refer to the Setting Up Your Computer IP
Address appendix.
Step 2. In Windows, click Start (usually in the bottom left corner), Run and then type “telnet
192.168.1.1” (the default IP address) and click OK.
Step 3. For your fi rst login, enter 1234 in the Password fi eld. As you type the password, the
screen displays an “x” for each character you type.
Step 4. After entering the password you will see the main menu.
Please note that if there is no activity for longer than fi ve minutes
(default timeout period)
after you log in, your WR1500 Wireless Router will automatically log you out.
17.2.1 Initial Screen
When you turn on your WR1500 Wireless Router, it performs several internal tests as well
as line initialization. After the initialization, the WR1500 Wireless Router asks you to press
[ENTER] to continue, as shown.