Filter
Top Products
Pelco Manual C1000M-B (1/96) 7
Figure 6. Keypad Layout
1. Power down the Inter-Check ICI1000SI unit.
2. Remove the four cover screws with a Phillips
screwdriver and set the cover aside.
3. Power up the ICI1000SI unit.
4. Program the Inter-Check unit for your particular
application.
5. When finished programming, replace the cover and
screw down firmly.
4.2 THE NV MEMORY WRITE PROTECT
SWITCH
Your new Inter-Check ICI1000S Series incorporates a
Non-Volatile (NV) type memory. This type of memory
does not require a battery to operate. Refer to Figure 5
for the location of this switch and note the locked and
unlocked positions. This switch must be positioned in
the UNLOCKED position if you intend on program-
ming the Inter-Check ICI1000S Series unit. If the switch
is in the LOCKED position and you try to enter pro-
gramming data, an “ERROR IN WRITING NV
MEMORY !!!” warning will be displayed on the moni-
tor screen. To allow programming, simply position the
write protect switch to the UNLOCKED position. When
programming is complete, position the switch to the
LOCKED position. This will protect your programming
from possible errors that may occur during AC power
fluctuations or complete Inter-Check ICI1000S Series
power loss.
4.0 INTER-CHECK ON-BOARD
KEYPAD OPERATION
The Inter-Check ICI1000S Series features a compact,
64 function keypad used for all programming functions.
Refer to Figure 6. The keypad contains 16 keys. The
four keys on the right side of the keypad are used for
both cursor movement and “shift operations”. The re-
maining keys contain alpha, numeric, and other char-
acters for editing your program. These keys each con-
tain five functions when used with the shift keys.
To select: Press:
White Character Desired Key
Color Character Cursor key of matching color
and then desired key.
Cursor Movement Desired arrow key twice.
Main Menu Enter (ENT)
Exit Main Menu Escape (ESC)
4.1 PROGRAMMING THE ICI1000SI
NOTE: Please familiarize yourself with the
information in this manual prior to installation
and operation. Contact the customer's register
dealer/installer prior to installation and opera-
tion. Some warranties and/or service agree-
ments may be affected.
If your Inter-Check unit is an ICI1000SI, it utilizes an
internal keypad for programming all parameters. Fol-
low the steps below prior to programming.