Filter
Top Products
24 Pelco Manual C1000M-B (1/96)
6. Print the ALARM INPUT text via auxiliary port.
Do this by selecting #4 (AUXILIARY PRINT
LINK) in the ALARM INPUT PROGRAM
MENU.
AUX PRINT
1=OFF 2=ON
7. The descriptor will describe the type of action that
caused the alarm. To program the descriptor “REG.
1 OPEN”, enter #5 (ALARM TEXT) in the
ALARM INPUT PROGRAM MENU.
ENTER DATA WANTED UP TO 12
CHARACTERS.
(ESC) TO SKIP, (ENTER) TO ENTER,
(BS) TO BACKSPACE
ALARM IN
REG.1 OPEN
Press ENTER
8. The final display should look like this for ALARM
1 IN:
ALARM IN DWELL : 10/ON/V1A1
= =>REG. 1 OPEN
DESCRIPTION: The alarm input is ON and
is currently being “sent” to both the video and
an auxiliary printer. Alarm occurs after a clo-
sure of 10 SECONDS with a descriptor dis-
playing REG.1 OPEN.
Table 2 is used to identify the descriptors used through-
out the Inter-Check ICI1000S Series menu system.
4.13 THE NV MEMORY WRITE
PROTECT SWITCH
Your new Inter-Check ICI1000S Series incorporates a
Non-Volatile (NV) type memory. This type of memory
does not require a battery to operate. Refer to Figure 5
for the location of this switch and note the locked and
unlocked positions. This switch must be positioned in
the UNLOCKED position if you intend on program-
ming the Inter-Check ICI1000S Series unit. If the switch
is in the LOCKED position and you try to enter pro-
gramming data, an “ERROR IN WRITING NV
MEMORY !!!” warning will be displayed on the moni-
tor screen. To allow programming, simply position the
write protect switch to the UNLOCKED position. When
programming is complete, position the switch to the
LOCKED position. This will protect your programming
from possible errors that may occur during AC power
fluctuations or complete Inter-Check ICI1000S Series
power loss.
Table 2. Label Descriptors
Descriptor Display
Data D1
Video V
Exception E
Auxiliary 1 A1
Printer PNTR
Exception Alarm EALRM
Table 3. ICI1000S Series Pinouts
Color Pin # Description
White 1 Program download input
Black 2 Signal ground
Red 3 RS232 current loop CHANNEL
INPUT
Green 4 TTL printer output
Yellow 5 ICI1000PIM input
Blue 6 Alarm input