Filter
Top Products
144
Chapter 5 Internet Fax
Adding End Receiving Stations for Relayed Transmission
You can add end receiving stations to the Address Book by the following procedure.
zIf broadcasting to multiple end receiving stations is required, use group dialing. (See page 175)
z“140 LAN RLY XMT Request” must have been set to “Valid” in Function Parameters (Fax/Emai Settings> Fax
Parameters) to have a LAN relayed transmission request preprogrammed in the address book. For more
operational details, refer to Fax/Email Settings in the Operating Instructions (For Function Parameters) on the
provided CD-ROM.
zFor instructions on registration in the address book, refer to Address Book (see page 164).
zYou cannot use the address registered for Relayed Transmission for Confidential Communication, Sub-
Address Communication, and Password Transmission. Register an address with out a relayed station. (See
page 165)
1
Press the Function key.
2
Select “Fax/Email Settings”.
3
Select “00 Address Book”.
4
Select “01 Add Telephone Number”.
5
Enter a fax number, and then select
“OK”.
zSelect “Clear” to delete the fax number one
digit at a time.
z
For using the onscreen keyboard, refer to
Manual Dialing (see page 16)
.