Filter
Top Products
71
Chapter 3 Convenient Fax Features
Password Transmission
To utilize the password-protected transmission feature, follow the steps below:
zYou must set the password (4-digit) in the “43 Password-Transmit” setting in advance, in Function Parameters
(Fax/Email Settings> Fax Parameters).
1
Place Original(s).
z
Refer to
Placing Originals (Facsimile/Internet
Fax) in the Operating Instructions
(For Basic
Operations) of provided booklet.
2
Press the Fax key.
3
Select “More Menus”.
4
Select “Select Mode”.
5
Select “Password XMT”.
6
Select “On”, and then select “OK”.
7
Set “Quality Adj.” as required.
zRefer to Setting Original Quality (see page
26).
8
Select a destination.
zRefer to Entering a Destination (see page
16).
zChoose the address except registered for
Relayed Transmission.
9
Press the Start key.
Password-protected transmission starts.
zThe transmission fails if the password of
both units does not match.
Select to perform
Password-Protected
Transmission.
Select not to perform
Password-Protected
Transmission