Filter
Top Products
152
Chapter 5 Internet Fax
Result of Relayed Transmission
When the relayed transmission feature is used, two reports as described below are transmitted from
the relay station to the initial sending station and administrator's computer confirming the results of a
relayed transmission.
Relayed Transmission Report (communication journal)
When a relay station completes a relayed transmission, it transmits a Relayed Transmission Report
(Communication Journal) to the initial sending station to report the relay result.
The Relayed Transmission Report (Communication Journal) is transmitted when “143 Relay XMT
Report” has been set to “Always” or “Inc Only” in Function Parameters.
No. Item Explanation
(1) Indication of
communication mode
Indication of communication mode.
(2) Start time of
communication
Start time of communication.
(3) End time of
communication
End time of communication.
(4) File number 001 to 999 (When the communication is stored into the memory, a file
number is assigned for each communication.)
(5) Station number Sequential number of the Stations.
(6) Communication result Communication result
“R-OK” indicates that the Relayed XMT Request was successful.
“3-digit Info Code” indicates that the communication has failed.
(7)
Key name or mark
mark indicates dialing by direct number dialing.
(8) Recorded name in the
Address Book, direct
dialing number, or Email
Address
Recorded name in the Address Book, direct dialing number, or Email
Address.
************** - Comm. Journal - ******************* Date MMM-dd-yyyy ***** Time 15:00 ********
(1) (2) (3)
Mode = Relayed Transmission Start=MMM-dd 15:00 End=MMM-dd 15:00
File No.= 050
(4)
(5) (6) (7) (8) (9) (10)
STN Comm. Key Name Station Name/Email Address/Telephone No. Pages Duration
No.
001 R-OK [STOCKHOLM ] STOCKHOLM 001/001 00:00:15
002 R-OK [ROME ] ROME 001/001 00:00:15
- PANASONIC -
*****DP-xxxxx************************** - HEAD OFFICE - ****** - 201 555 1212 - **********