Filter
Top Products
119
AV Chapter 13
Customising the Audio Setting related
with Audio Visual
❒ When a Pioneer external unit is connected
with an IP-BUS cable, select [EXT]. When
the audio source is [EXT], the “Video
image” of the Pioneer external unit can be
displayed.
Switching the auxiliary setting
It is possible to use auxiliary equipment with the
navigation system as the one of sources. Activate
the auxiliary setting when using auxiliary equip-
ment connected to the navigation system.
1 Touch [AUX Input] in the System Set-
tings menu.
Touching [AUX Input] switches between
[On] and [Off].
➲ “Selecting [AUX] as the source” ➞
Page 109
Switching the muting/attenua-
tion timing
You can mute the audio source volume or attenu-
ate the output signal. This setting is invalid for the
mute signal has been received from the MUTE
lead connected to the navigation unit. (Even if
this setting is [Off], the navigation system will
mute or attenuate the audio source volume when
the signal is output via MUTE lead.)
1 Touch [Mute Set] in the System Settings
menu.
Each touch of [Mute Set] changes the set-
tings as follows:
• Guide/Tel/VR — The volume is muted or
attenuated according to the following con-
ditions
— When the navigation outputs the guidance
voice.
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, incoming
call).
— When the voice recognition mode is acti-
vated.
• Tel/VR — The volume is muted or attenu-
ated according to the following conditions
— When you use a mobile phone via Blue-
tooth technology (dialling, talking, incoming
call).
— When the voice recognition mode is acti-
vated.
• Off — The volume does not change
❒ Operation returns to normal when the cor-
respond action is ended.
❒ The navigation voice guidance itself can-
not be attenuated or muted. If you want to
mute the navigation guidance voice tem-
porarily, use on the navigation map
screen.
Switching the muting/attenua-
tion level
You can select the muting/attenuation level of
[Mute Set]. This setting is also effective for a
mute signal that has been received from the
MUTE lead connected to the navigation unit.
❒ This menu is not available in the following
cases:
— Audio source is [OFF]
— During muting/attenuation
1 Touch [Mute Level] in the System Set-
tings menu.
Each touch of [Mute Level] changes the set-
tings as follows:
• All — The volume becomes 0
• –20dB — The volume becomes 1/10
• –10dB — The volume becomes 1/3
❒ When you select [All], [Mute] is displayed
and no audio adjustments are possible
during the sound is turned off.
❒ When you select [–20dB] or [–10dB], no
audio adjustments, except volume control,
are possible during the sound is attenu-
ated.
❒ Operation returns to normal when the cor-
respond action is ended.
❒ Even when a mute signal has been
received from the MUTE lead connected to
the navigation unit, navigation voice guid-
ance cannot be attenuated or muted. If you
want to mute the navigation guidance
voice temporarily, use on the naviga-
tion map screen.