Pioneer AVIC-HD3 Computer Drive User Manual


 
155
AppendixNAVI/AV
Bluetooth unit error. It is not possible
to find any mobile phones.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or Bluetooth unit carries out
another processing when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Bluetooth unit error. The device
name could not be set.
If the Bluetooth unit (sold separately)
is disconnected from this navigation
system or the Bluetooth unit carries
out another process when you
change the device name.
• Check the connection and retry.
• Establish that connection tempo-
rarily and retry later.
Registration is not available. If you try to perform another opera-
tion immediately after connection
failure.
Wait for a while and retry.
Reading failed. •If you transferred the data from
your mobile phone in a format can
not be received with navigation sys-
tem.
• Disconnection has been made dur-
ing transfer for some reason.
• Select just a suitable item, format,
and then retry.
• Connect your mobile phone again
and retry.
Calibration failed.
Please refer to the owner’s manual.
The touch panel calibration has not
been carried out with appropriate
steps.
Please read the instruction of touch
panel calibration and retry.
Page 142
The HDD is not connected. Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
Cannot use HDD. Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
There is no applicable program. Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error.
Consult your dealer.
The HDD cannot be operated due to
excessive heat.
Please move your vehicle to a safe
place and turn the power off until the
temperature goes down.
Hard disk drive cannot run due to
high temperature.
Park your vehicle to safe place, turn
the ignition switch off, and wait until
the temperature inside the vehicle
drops.
Message When What to do