Filter
Top Products
Setting up
1 Place the projector on a solid, flat surface.
the projector
2 Position the projector so that the side with the handle is fac-
ing the projection screen.
3 Locate the arm release lever. Slide it gently in the direction
of the arrow (see the illustration below).
Sliding the lever
to release the arm
4 The arm pops up. Gently lift the arm until it is fully extend-
ed.
Do not force the arm farther.
5 Locate the flip-mirror-release lever on the top of the arm.
Slide it in the direction of the arrow (in the illustration) as
you pull up on the lift tab. This releases the mirror.
Sliding the lever to
release the flip mirror
6 Introduction