Filter
Top Products
Note: Some notebook computers require that you press a
combination of keys or use a control panel to set the projec-
tor as an external monitor. Refer to your notebook computer
manual for more information.
Workstations
13C3 video connections
(except Silicon Graphics workstations)
If your workstation has a 13C3 connector at the computer
video port:
1 Disconnect your computer-to-monitor cable at the computer
end.
2 Connect the free end of the monitor cable to the projector
COMPUTER OUT connector.
3 Use the Polaview 13C3-to-LCD connector cable (part num-
ber C801-6) to link the projector to the computer. Connect
the end marked LCD to the projector COMPUTER IN connec-
tor, and the end marked COMPUTER to the computer video-
output connector.
Workstation
video-out connection
to the projector
28 Detailed setup
LCD
connector
cable
Monitor cable