Filter
Top Products
5 Locate the door to the lamp chamber on the right side of the
left panel. It has one slotted, captive screw. With a screw-
driver or coin, loosen the screw, then open the lamp-cham-
ber door.
Opening the
lamp-chamber door
6 Locate the thumbscrew on the right side of the lamp and
unscrew it. When the thumbscrew is loose enough, gently
pull the lamp from the right socket. Then slide it out from
the left.
Installing
Caution: Make sure to wear gloves or use a soft cloth to
the new lamp
handle the new lamp. Never touch the lamp with your bare
hands, as this can significantly shorten the life of the lamp.
If you do touch a portion of the lamp with your bare hands,
wipe it off with a soft cloth moistened with denatured
alcohol.
To install a new lamp:
1 Remove the lamp from the package.
2 The lamp has thumbscrews on both ends. Remove the
thumbscrew from the end of the lamp that has no printing.
Discard the thumbscrew.
90 Maintenance