Filter
Top Products
Caution: Never touch the LCD panel located underneath
the top-cover projection lens. Use caution when changing
the filters.
6 Locate the three screws at the top of the right side panel
(see the illustration below). Remove the screws and unsnap
the panel, from the rear first.
The screws at the
top of the right
side panel
7 The filters are now exposed (see the illustration below).
The two right
side filters
Remove the retaining screw to gain access to the filters. Pull
the front filter out
To replace the covers, reverse steps
1 through 5, taking care
to align the top and side covers. Make sure to reattach the
ribbon cable before you replace the top cover. The ribbon
Maintenance 95