Filter
Top Products
Connecting video and audio to the projector
This section describes how to connect audio and video to
your projector. The Polaview Model 305 Projector has multi-
ple inputs for audio and video. If you are connecting only
one audio or video source to your projector, use the VIDEO
1 and AUDIO 1 ports. Make sure that you connect your
audio and video to the corresponding group. If you connect
video to group 1 and audio to group 2, you cannot hear the
audio. Even though you connect both COMPUTER AUDIO
IN and AUDIO IN, only one of them is active:
• If you select computer video, COMPUTER AUDIO IN is
active.
• If you select NTSC/PAL/SECAM/S-video, AUDIO 1 IN is
active.
Connecting video
The projector can project video from NTSC, PAL or
from a VCR
SECAM sources (i.e., VCRs, laserdisc players and video
cameras).
The projector
connected to
a VCR
Detailed setup 33
VIDEO RECORDER – VCR
VIDEO OUT
AUDIO OUT