SpectraLink 8000 Telephony Gateway Administration Guide
2. Run a terminal emulation program (such as HyperTerminal™) or
use a VT-100 terminal with the following configuration:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
3. Press Enter to display the SpectraLink 8000 Telephony Gateway
login screen.
4. Enter the default login:
admin and default password: admin.
These are case sensitive.
Select a SpectraLink 8000 Telephony
Gateway
to Administer
After connecting to the SpectraLink 8000 Telephony Gateway, the first
Administrative Console screen is the
Gateway Connection Selection
screen. It allows you to select the SpectraLink 8000 Telephony
Gateway to be administered. Once they are configured, this screen
lists all SpectraLink 8000 Telephony Gateways by hostname and IP
address. The hostname may either be the default name or a custom
name established from the
Network Configuration screen. The
following example shows just one SpectraLink 8000 Telephony
Gateway in a system:
46 PN: 1725-36028-001_T.doc