Filter
Top Products
SpectraLink 8000 Telephony Gateway Administration Guide
1. Navigate to the
NetLink Wireless Telephone System menu for the
SpectraLink 8000 Telephony Gateway that serves the port to be
configured. Select
Telephone Line Configuration.
2. Enter the following information for each assigned line. Use the
arrow keys to navigate through the fields.
MAC Address: The MAC address is printed on the sticker
underneath the battery on the handset. It can also be displayed on
the handset by turning off the handset, and then pressing and
holding the
Power On button. The MAC address appears on the
first line of the display (12 characters).
The MAC address can be manually entered by typing the entire
address including digits and colons.
The MAC address can be automatically entered by typing R and
following the prompts to turn on the handset.
Name: Enter the user name assigned to the telephone. This is for
record keeping only; it does not communicate the name to the
PBX or the handset.
Extension: Enter the extension assigned to this telephone. This is
for record keeping only; it does not communicate the extension to
the PBX or the handset.
3. Write the MAC address on the Wireless Planning Device
Worksheet.
4. Repeat steps 2, 3, and 4 for each handset to be added or changed.
5. Press Esc to return to the
NetLink Wireless Telephone System
menu.
68 PN: 1725-36028-001_T.doc