SpectraLink 8000 Telephony Gateway Administration Guide
Programming the ADMIN Feature
The ADMIN option allows the system administrator to add and delete
handsets via another handset, rather than via the SpectraLink 8000
Telephony Gateway. Any function key sequence may be programmed
to
ADMIN by typing ADMIN next to the desired key. The ADMIN
feature may be programmed on only one SpectraLink 8000 Telephony
Gateway (the one that contains the line used by the system
administrator) in order to limit its accessibility system-wide.
When the ADMIN function is active, pressing the function key
sequence on the handset will open the ADMIN function. The
following steps allow the administrator to add or delete a handset:
1. Press
FCN plus the assigned key. Once in the ADMIN function,
pressing the
FCN key will cancel the action and return to the
previous menu level.
2. Enter the SpectraLink 8000 Telephony Gateway password using
the handset keypad. Note that the password is case sensitive. The
key steps through each letter and number as it is repetitively
pressed.
3. Once the password is accepted, the SpectraLink 8000 Telephony
Gateways are listed. Use the arrow keys to scroll through the list.
Press
0 (the zero key) to select the correct SpectraLink 8000
Telephony Gateway.
4. The handsets assigned to the selected SpectraLink 8000 Telephony
Gateway are listed by the last three byte numbers in the MAC
address. If a line is not assigned to a handset, not used will
display. Use the arrow keys to scroll through the lines.
5. Display the line to add or delete a handset and follow the prompts
displayed on the handset.
6. If a name or extension must be associated with an added handset
for record keeping purposes, it must be entered on the
SpectraLink 8000 Telephony Gateway
Telephone Line
Configuration
screen.
76 PN: 1725-36028-001_T.doc