Filter
Top Products
2–Configuring NIC
NIC Partitioning (NPAR)
2-64 SN0054671-00 B
Change Personalities
To change function types (personalities) as needed for your network:
1. From the Server Manager, select Diagnostics > Device Manager >
Network Adapters.
2. Right-click the desired QLogic 10 Gigabit Ethernet CNA device to change
the function type and select Properties from the context menu.
3. On the NIC Partition Management tab, right-click one of the enabled
functions and select Convert to <Protocol> from the context menu
(Figure 2-42).
Figure 2-42. Selecting Convert to NIC from Context Menu
4. Repeat these procedures to change the function types as desired.