Filter
Top Products
2–Configuring NIC
NIC TroubleShooting/Diagnostics
SN0054671-00 B 2-77
3. On the adapter properties page, click the Diagnostics tab. Figure 2-47
shows the Diagnostics page.
Figure 2-47. Diagnostics Tests on Windows
4. Under Diagnostic Tests, select one or more check boxes indicating the
tests you want to run: Hardware Test, Register Test, Interrupt Test,
Loopback Test, and Link Test. (“Windows Diagnostic Test Descriptions” on
page 2-81 describes each test type.)
5. Click Run Tests.
NOTE:
Only one test can run at a time. Multiple tests can run sequentially.