Q-Logic 3200 Network Card User Manual


 
2–Configuring NIC
NIC TroubleShooting/Diagnostics
2-80 SN0054671-00 B
For every test performed, the diagnostic utility shows the following data:
Total number of attempts
Number of successful completions
Number of failures
You can either perform all tests in succession, or perform only specific tests
specified by the preceding command-line parameters.
-I
--IRQS
Test interrupt mechanism (default)
-L
--IntLB
Internal loopback test (default)
-H
--Hw
Hardware test (default)
-S
--LinkST
Link status test (default)
-nR
--noCRegs
No control registers test (combine –D or –a)
-nl
--noIRQS
No interrupt test (combine –D or –a)
-nL
--noIntLP
No internal loopback test (combine –D or –a)
-nH
--noHw
No hardware test (combine –D or –a)
-nS
--noLinkSt
No link status test (combine –D or –a)
-h
--help
View help text
Table 2-14. Windows QConvergeConsole CLI—Diagnostic Test
Commands (Continued)
Command Description