Filter
Top Products
Quick Start
Step 1. Install the Adapter Hardware
xxiv SN0054671-00 B
6. Grasp the adapter by the top edge and seat it firmly into the appropriate slot
(see Figure i).
Figure i Illustration of Server Motherboard and Slots
7. Refasten the adapter’s retaining bracket using the existing screw or lever.
8. Close the computer cover.
9. Plug the appropriate Ethernet cable (either copper or optical) into the
adapter.
Optical models ship with optical transceivers already installed. The
8200 and 3200 Series Adapters will only operate with optical
transceivers sold by QLogic.
For copper connectivity, see the list of approved SFP+ direct-attach
copper cables on QLogic's Web site:
http://www.qlogic.com/Resources/Documents/LineCards/Copper_Cabl
es_Support_Matrix_Line_Card.pdf
10. Plug in the power cable and turn on the computer.
ADAPTER
RETAINING
BRACKET
LEVER
SLOT COVERS
SYSTEM
CHASSIS
PCI EXPRESS x8
(OR LARGER) SLOT
REQUIRED FOR
QLOGIC ADAPTERS.
SCREW
ADAPTER