Q-Logic 3200 Network Card User Manual


 
2–Configuring NIC
NIC TroubleShooting/Diagnostics
SN0054671-00 B 2-85
For example:
qaucli -nic -testlink
=== Link Test for 1. CNA Port Index ===
Function is not supported by this hardware/driver/api stack
=== Link Test for 2. CNA Port Index ===
Function is not supported by this hardware/driver/api stack
=== Link Test for 3. CNA Port Index ===
Function is not supported by this hardware/driver/api stack
=== Link Test for 4. CNA Port Index ===
Function is not supported by this hardware/driver/api stack
=== Link Test for 5. CNA Port Index ===
Link Test Starts...
Test Status: Passed (Passed=1, Failed=0, ErrorCode=0)
Register Test Results:
Status=Passed
Passed=1, Failed=0, ErrorCode=0
=== Link Test for 6. CNA Port Index ===
Link Test Starts...
Test Status: Passed (Passed=1, Failed=0, ErrorCode=0)
Register Test Results:
Status=Passed
Passed=1, Failed=0, ErrorCode=0
Hardware
(Continued)
HW_EPG_QREAD_TOUT EPG read queue timeout
HW_EPG_QWRITE_TOUT EPG write queue timeout
HW_EPG_CQ_W_FULL EPG completion queue write full
HW_EPG_MSG_CHKSM Egress packet generator (EPG) mes-
sage checksum error
HW_EPG_MTLQ_TOUT EPG MTL queue fetch timeout
HW_PEG0 PEG 0 is not used
HW_PEG1 PEG 1 is not used
HW_PEG2 PEG 2 is not used
HW_PEG3 PEG 3 is not used
HW_ERRCNT Hardware error count
Table 2-16. Windows Diagnostic Test Messages (Continued)
Test Error Message Description