Filter
Top Products
User’s Guide—Converged Network Adapters and
Intelligent Ethernet Adapters
SN0054671-00 B Page iii
Moved PXE parameter from Function parame-
ter to Protocol parameter.
Removed PXE note about LOM with PXE
parameter.
Removed bote and embedded LOM with the
Protocol parameter.
“Protocol” on page 1-9
Removed references to iBFT. “Multi-boot Image for 10Gb Converged Network
Adapter—CNA Function Configuration Utility” on
page 1-5, “Protocol” on page 1-9, Function parameter
section (removed)
Changed section title (removed utility name).
Removed Function parameter section.
“Adapter Configuration Utility” on page 1-8
Updated Readme file name. “Installing NIC in ESX/ESXi” on page 2-1, “Installing
iSCSI in Linux” on page 3-1, “Installing iSCSI in ESX”
on page 3-2, “Installing FCoE in Linux” on page 4-1
Added ESXi to section title. “Installing NIC in ESX/ESXi” on page 2-1
Removed phantomcore Utility section. from “Linux NIC Driver Management Applications” on
page 2-6
Corrected values for Priority & VLAN Tag
parameter in Table 2-1.
“QLogic Device Windows Property Pages” on
page 2-9.
Added new section about link aggregation con-
trol protocol (LACP).
“Using LACP on 8200 Series Adapters for Windows”
on page 2-35
Changed the NPAR instructions. “NIC Partitioning (NPAR)” on page 2-38, and all asso-
ciated subsections
Removed the note stating that external and
internal loopback tests are not supported.
“Linux Diagnostics” on page 2-73, “QLogic Device
Windows Property Page Diagnostics” on page 2-76
Corrected the name of the iSCSI VMware
readme file.
“Installing iSCSI in ESX” on page 3-2
Added the sentence “
Use Fast!UTIL to pro-
gram the QLogic iSCSI adapter to boot
from the SAN” to the end of the first para-
graph.
“iSCSI Boot Setup Using Fast!UTIL” on page 3-6
Changed the iSCSI boot setting instructions. “Configuring iSCSI Boot Settings” on page 3-7
Changed section heading to add IPv4;
removed note about IPv6 not being supported.
“DHCP Boot Setup for iSCSI Boot (IPv4)” on page 3-8