Q-Logic 3200 Network Card User Manual


 
User’s Guide—Converged Network Adapters and Intelligent Ethernet Adapters
8200 and 3200 Series
Index-8 SN0054671-00 B
teaming
configuration, saving 2-34
creating a team 2-21
deleting a team 2-33
failsafe team 2-32
MAC address 2-15
members, adding 2-28
members, removing 2-29
modes 2-15
modifying a team 2-31, 2-33
NPAR restrictions 2-41
QCC CLI, using for 2-19
statistics 2-34
Windows 2-14
technical support xvii
temperature ranges 1-4
terminology xvi
tests
external loopback 2-81
Flash 2-75, 2-81
hardware 2-75, 2-81, 2-82, 2-83
internal loopback 2-75, 2-81
interrupt 2-75, 2-81, 2-82
link 2-76, 2-81, 2-82
Linux diagnostics test messages 2-76
loopback 2-82, 2-83
ping 2-81
register 2-76, 2-81, 2-82, 2-83
transceiver DMI data 2-81
Windows QCC CLI diagnostic test
commands 2-79
Tomcat Server
definition of 2-44
Linux, installing on 1-17
Linux, stopping and starting on 1-18
QLogic Adapter vCenter Plug-in, using on
1-17
requirement for QLogic Adapter vCenter
Plug-in 1-11
Windows, installing on 1-18
Windows, stopping and starting on 1-18
training xviii
transceiver DMI data test 2-81
transmission control protocol/internet protocol,
See TCP/IP
troubleshooting
FCoE 4-6
iSCSI function 3-9, 3-10
NIC 2-73, 2-87
U
UDP Checksum Offload IPv4 parameter 2-13
UDP Checksum Offload IPv6 parameter 2-13
UEFI, definition of Glossary-5
updating Flash 1-16
updating multi-boot code 1-6
V
vCenter Server 1-11
VIB file 1-12
vihostupdate command 1-12, 1-13
VLAN
ID for Setting parameter 2-13
NPAR restrictions 2-41
QCC GUI and QCC CLI, configuring with
2-14
VMware
FCoE installation in 4-2
iSCSI initiator, configuring in 3-6
iSCSi, installing in 3-2
vSphere client 1-10
vSphere client, QLogic Adapter vCenter
Plug-in, launching from 1-20
W
Warranty and safety A-1