Filter
Top Products
%$.
/+
To prevent any potential problems associated with paper dust accumulating inside
the printer, you should clean both the inside and the outside of the printer on a
regular basis.
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning.
ACHTUNG!
Ziehen Sie den Netzstecker aus der Steckdose bevor Sie den Drucker
reinigen.
0
Either clean the printer before use, or allow a few minutes after unplugging it to
allow the fusing unit to cool down.
Turn off the printer, unplug the power cord, and disconnect all interface cables
before cleaning inside the printer.
Read all caution and warning labels carefully, making sure to follow any instruc-
tions contained in them. These labels are located on the inside of the printer’s
covers and the interior of the printer body.
Use only dry, lint-free cotton cloths or swabs.
Make sure any parts removed during cleaning are replaced before you plug in the
power cord, reconnect the interface cables, and turn on the printer.
»Note:
In compliance with UL guidelines, “The appliance inlet is considered to be
the main disconnect device.”
&-
»Note:
A dry cotton cloth and dry cotton swab are required for this procedure.
These items in the transfer unit require cleaning:
Registration rollers
Transfer roller
Paper discharger