Filter
Top Products
&
$
-!
Ethernet error An Ethernet error has occurred:
101 Hardware address conflict
103 mem err
104 appinit
105 net err
106 net err
107 event err
108 event err
109 Ethernet address conflict
110 err
111 err
112 couldn’t program physical
113 err
114 RARP err
115 couldn’t program logical address
124 snetopen err
125 netxopn err
126 makeport full
241 shift err
242 fifo count error
Record the error num-
ber, if one is given, and
then contact your sys-
tem administrator or the
QMS Customer
Response Center.
Erasing flash The flash ROM is erasing the old ROM
when you are installing a new system.
No action needed.
F# xxxxxxxx xxxx
i960 fault
There is a processor fault. Call for service.
Flash error There is a flash ROM problem. Call for service.
Front panel
Misinstalled
The front cover is not closed. Close the front cover.
Fuser c. roller
Misinstalled
The fuser cleaning roller is either
incorrectly installed or missing.
Install the fuser cleaning
roller correctly.
Fusing unit
Misinstalled
The fuser is either incorrectly installed
or missing.
Install the fuser
correctly.
HW err 0
Press cancel
The Ethernet hardware address is not
set.
Use the Ethernet HW
(Hardware) Address
menu to set the
hardware address.
Idle No jobs are in progress. No action needed.
This message... indicates... Do this...