QMS QMS magicolor 2 DeskLaser Printer Accessories User Manual


 
$"
%.,.%# %
0)
An Internet address is a 32-bit address assigned to hosts connected to a TCP/IP
network. It consists of a network part and a host part. While this address is expressed
to the network in binary form, it is usually written in decimal form. For example, the
binary Internet address
10000000 00001010 00000010 00011110
is written as follows in decimal form:
128.10.2.30
Use the Internet Address configuration to set your printer’s Internet address.
0&0(
Internet Protocol, the Internet standard protocol, defines the Internet datagram as the
unit of information passed across the Internet and provides the basis for connection-
less, best-effort packet delivery service. The Internet protocol suite is often referred to
as TCP/IP because IP is one of the two most fundamental protocols.
"
A device that examines data addresses, determines the most efficient pathway to the
destination, and routes the data accordingly. Each router has two addresses—one for
each network that it connects.
Use the Router 1 and Router 2 configuration menus to set the Internet address for one
or two routers.
*
A subnet is one physical network segment within an Internet.
*)
A subnet address is the division of the Internet address's local part into a physical
network part and a host part in order for the site to use a single Internet address for
multiple physical networks or subnets. This division of the host part has no effect on
the Internet address when it goes outside of the site. The process of using subnet
addresses is known as subnet addressing, subnet routing, or subnetting.