Filter
Top Products
%$.
/0
3 Open the printer’s front cover.
Squeeze the latch near the upper-right
corner of the cover.
Caution:
This is necessary, as it pulls the
toner cartridges forward slightly to make
room for the OPC belt cartridge. You could
damage the OPC belt if you don’t
do this.
»Note:
The illustrations for steps 3 through
16 show the printer without the duplexer.
However, the instructions are the same for
both models.
4 Pull the latch to release the top cover,
and then open the top cover.
Caution:
If you have a duplex model,
make sure you have opened the
duplexer’s rear cover first. Forced opening
of the top cover first may damage the unit.
5 Release the OPC belt cartridge lock
levers (one on each side of the OPC
belt cartridge opening).
»Note:
The white powder lubricant on a
OPC belt is normal; it won’t affect quality.